Chengdu Forster Technology Co., Ltd.
Integrity, pragmatism, innovation, and provide the best solution for your hydro power plant.
Add to Cart
Remote Control Of Water And Hydro Power Brushless Excitation Alternator Hydro Pelton Turbine Of Design
Our main products included:
1. Kaplan turbine generators series.
2. Turgo turbine generators series.
3. Tubular turbine generators series.
4. Francis turbine generators series.
5. Pelton turbine generators series.
Product features:
According to the working principle, the turbine can be divided into two major categories: impact turbine and counter-turbine. Impact type
It is rotated by the impact of the water flow. The pressure of the water flow during the working process is constant, mainly the conversion of kinetic energy; the runner of the counter-turbine turbine is rotated by the reaction force of the water flow in the water, and the pressure energy and kinetic energy of the water flow change during the working process. But mainly the conversion of pressure energy.
Pelton turbine according to the flow direction can be divided into cutting type (also known as bucket type) and oblique type two categories. The structure of inclined turbine is basically the same as that of bucket turbine, except that the direction of jet flow has an inclination Angle, which is only used for small units.
Theoretical analysis shows that the efficiency is highest when the circumferential velocity at the circlet is about half of the jet velocity. When the load of this kind of turbine changes, the direction of the water inlet speed of the runner remains the same. In addition, this kind of turbine is used for high-head power stations, where the head changes relatively little and the speed changes little, so the efficiency is less affected by the load change, and the efficiency curve is relatively gentle, with the maximum efficiency over 91%.
1. suitable for high head,small flow and flow changes in large runoff hydropower station.
2. With the power plant investment is small,compact units structure characteristics.
3. Has the efficiency changes smoothly,operating a wide range,even in the 15--20% load is reduced efficiency.
4. Suitable for high head,small flow station in mountainous area.
5. A unit construction,simple restrictions without cavitation condition,the advantages of stable operation,less investment,construction area.
| Pelton tubine generator unit | Generator | Gevernor or Regulating work | Valve | |||||
| Turbine | ||||||||
| Type | Water head(m) | Discharge (m³/s) | Output(kw) | Speed (r/min) | Type | Capacity (kw) | ||
| CJA475-W-125/2x14 | 137 | 1.541 | 1739 | 375 | SFW1600-16/2600 | 1600 | CJWT- II BWT-6000 | DN800 |
| 157 | 1.662 | 2151 | SFW2000-16/2600 | 2000 | ||||
| 183 | 1.783 | 2688 | 428.6 | SFW2500-14/2600 | 2500 | |||
| 214 | 1.941 | 3422 | SFW3200-14/2600 | 3200 | ||||
| 248 | 2.082 | 4255 | 500 | SFW4000-12/2600 | 4000 | CJWT- II BWT-10000 | ||
| 287 | 2.237 | 5291 | SFW5000-12/2600 | 5000 | ||||
| CJA475-W-140/2x14 | 116 | 1.429 | 1366 | 300 | SFW1250-20/2600 | 1250 | CJWT- II BWT-6000 | DN800 |
| 137 | 1.541 | 1739 | 333.3 | SFW1600-18/2600 SFW2000-18/2600 | 1600 | |||
| 157 | 1.662 | 2151 | 2000 | |||||
| 183 | 1.783 | 2688 | 375 | SFW2500-16/2600 | 2500 | |||
| 214 | 1.941 | 3422 | 428.6 | SFW3200-14/2600 | 3200 | |||
| 248 | 2.082 | 4255 | SFW4000-14/2600 | 4000 | CJWT- II BWT-10000 | |||
| 287 | 2.237 | 5291 | 500 | SFW5000-12/2600 | 5000 | |||
| 333 | 2.417 | 6632 | SFW6300-12/2600 | 6300 | ||||
| 400 | 2.495 | 8421 | 600 | SFW8000-10/2600 | 8000 | |||
| CJA475-W-140 /2x16 | 114 | 1.851 | 1739 | 300 | SFW1600-20/2600 | 1600 | CJWT- II BWT-6000 | |
| 132 | 1.977 | 2151 | SFW2000-20/2600 | 2000 | ||||
| 153 | 2.132 | 2688 | 333.3 | SFW2500-18/2600 | 2500 | |||
| 179 | 2.32 | 3422 | 375 | SFW3200-16/2600 | 3200 | CJWT- II BWT-10000 | DN 1000 | |
| 207 | 2.495 | 4255 | SFW4000-16/2600 | 4000 | ||||
| 240 | 2.675 | 5291 | 428.6 | SFW5000-14/2600 | 5000 | |||
| 279 | 2.884 | 6632 | 500 | SFW6300-12/2600 | 6300 | |||
Product pictures:
Installation picture:
Q1, Which turbine should I choose?
Please tell me the water head, flow rate, frequency, Total power you need
, voltage, on grid or off grid operation, we will propose a solution.
Q2, Can your factory provide all the equipment for hydropower generation?
Yes, we can provide you with turbines, hydro-generators, pressure regulators, turbine wheels, control panels, transformers, monitoring systems and more.
Q3, Can you do EPC for a hydroelectric power plant?
Yes, we can provide TURN-KEY and EPC services including measurement, design, manufacturing, construction, manufacturing, commissioning, inspection, maintenance runner replacement and refurbishment/upgrade/improvement/repair/refurbishment of turbines/generators including bearings, seals For parts and key parts, we will send technicians and workers to install equipment.
Q4,Is your company a trading company or a manufacturer?
We are a manufacturer of hydro turbine generators and started to promote the international market in 2013. Our factory is located in Sichuan, where China's water conservancy and hydropower is most developed. Welcome to visit our factory in China.
Q5, How many an acceptable MOQ?
For this product, our acceptable MOQ is 1 set.
Q6,How long is the delivery time?
Delivery times range from 15 days to 6 months depending on the model you are purchasing.
Q7,Does your company have its own independent official website?
Of course, and we can see more information about our company and products on our official website.
website address: www.fstgenerator.com