Chengdu Forster Technology Co., Ltd.
Integrity, pragmatism, innovation, and provide the best solution for your hydro power plant.
Add to Cart
500KW Hydroelectric Equipment Control Panel For Hydro Power Plant
The water flow of the Francis turbine flows into the runner from the horizontal direction around the turbine to the center, and then turns to the downward exit. The water flows into the runner and pushes the runner when passing the blades in the direction of the shaft core, and also pushes the runner when passing downwards through the blades. wheel. That is to say, the water does work when passing through the blades in the radial and axial directions, so it is called a Francis turbine, also known as a radial axial flow turbine.
| HL220-WJ-50 turbine performance data and supporting table | |||||||
| Model | Turbine Parameters | Generator Parameters | Driving mode | ||||
| Design head(m) | Under the design head | Design speed (r/min) | The power of generator | Rated speed(r/min) | |||
| Flow rate (m3/s) | The output(kw) | ||||||
| HL220-WJ-50 | 15.8 | 1.08 | 140 | 546 | 125 | 600 | Direct Connection |
| 18.5 | 1.186 | 179 | 591 | 160 | 600 | ||
| 21.3 | 1.3 | 223 | 634 | 200 | 600 | ||
| 24.8 | 1.353 | 276 | 684 | 250 | 750 | ||
| 29 | 1.486 | 351 | 740 | 320 | 750 | ||
| 33.6 | 1.633 | 441 | 796 | 400 | 750 | ||
| 39.3 | 1.711 | 544 | 861 | 500 | 1000 | ||
| 45.2 | 1.827 | 680.4 | 924 | 630 | 1000 | Direct Connection | |
| 52.8 | 2.011 | 864 | 998 | 800 | 1000 | ||
| 61 | 2.2 | 1080 | 1073 | 1000 | 1000 | ||
| 71 | 2.405 | 1342 | 1158 | 1250 | 1000 | ||
Hydro Turbine Francis Product pictures:
Chengdu Forster Technology is focused on design and manufacturing hydro turbines. The company was founded in 1956. Forster is the first Chinese state-owned enterprise and spares no effort to expand international market in 2013,At present, we have obtained orders in many water-rich areas such as Europe, Asia, South America, North America, etc., and as partners, we are qualified as long-term suppliers in many regions.
The capacity of hydro turbines is up to 5KW-300MW for a unit. The main hydro turbines are Turgo turbine ,pelton turbines, francis turbines, kaplan turbines ,bulb tubular turbines and other types of turbines.Foster also supplies governors, valves, transformers, monitoring systems, microcomputer integrated control panels and other equipment for hydroelectric power plants.
Q1, Which turbine should I choose?
Please tell me the water head, flow rate, frequency, Total power you need
, voltage, on grid or off grid operation, we will propose a solution.
Q2, Can your factory provide all the equipment for hydropower generation?
Yes, we can provide you with turbines, hydro-generators, pressure regulators, turbine wheels, control panels, transformers, monitoring systems and more.
Q3, Can you do EPC for a hydroelectric power plant?
Yes, we can provide TURN-KEY and EPC services including measurement, design, manufacturing, construction, manufacturing, commissioning, inspection, maintenance runner replacement and refurbishment/upgrade/improvement/repair/refurbishment of turbines/generators including bearings, seals For parts and key parts, we will send technicians and workers to install equipment.
Q4, Is your company a trading company or a manufacturer?
We are a manufacturer of hydro turbine generators and started to promote the international market in 2013. Our factory is located in Sichuan, where China's water conservancy and hydropower is most developed. Welcome to visit our factory in China.
Q5, How many an acceptable MOQ?
For this product, our acceptable MOQ is 1 set.
Q6, How long is the delivery time?
Delivery times range from 15 days to 6 months depending on the model you are purchasing.
Q7, Does your company have its own independent official website?
Of course, and we can see more information about our company and products on our official website.
website address: www.fstgenerator.com