Chengdu Forster Technology Co., Ltd.
Integrity, pragmatism, innovation, and provide the best solution for your hydro power plant.
Add to Cart
Efficiency Micro And Small Hydro Electric Generator For Power Plants
Product features:
The Francis turbine is a type of water turbine that was developed by James B. Francis. It is an inward flow reaction turbine that combines radial and axial flow concepts. Francis turbines are the most common water turbine in use today.
The Francis type turbines are mostly suitable for hydro-power stations with medium or high head. The Francis type turbines manufactured by the Fuchun are compact in structure, reasonable in design, convenient in operation and maintenance and excellent in efficiency.
They are in both vertical and horizontal shaft arrangement and can be vastly selected by the hydraulic power stations. With many years of our own experience and absorbing advanced technology from domestic and abroad sources, and in meeting ever growing requirements of stations for various hydraulic power resources, the manufacture and design level of Francis turbines made in Fuchun has been raised to new stages.
The Francis turbines manufactured by the FORSTER, are ranging from 10 to 300m in water head, 100kW to 50MW in capacity and 0.35 to 4.0 m in runner diameter.
Pelton Tubrine Parameters:
| CJ237-W-45/1x4.5 Hydro Tubine Performance Data And Supporting Table | |||||||||||
| Model | Turbine Parameters | Generator Parameters | Driving mode | Speed Way | Water Intake | ||||||
| Design head(m) | Under the design head | Design speed (r/min) | The power of generator | Rated speed(r/min) | Runaway speed(r/min) | Vavel control | Guide vane control | Diameter (mm) | |||
| Flow rate (m3/s) | The output(kw) | ||||||||||
| CJ237-W-45/1x4.5 | 110 | 0.0709 | 62.9 | 932 | 55 | 1000 | 1800 | Straight league | manually | YTT-35 | 200 |
| 115 | 0.0725 | 67.6 | 953 | 55 | 1000 | 1800 | Straight league | manually | YTT-35 | 200 | |
| 120 | 0.0741 | 72.3 | 974 | 75 | 1000 | 1800 | Straight league | manually | YTT-35 | 200 | |
| 125 | 0.0756 | 76.9 | 994 | 75 | 1000 | 1800 | Straight league | manually | YTT-35 | 200 | |
| 130 | 0.0771 | 81.7 | 1013 | 75 | 1000 | 1800 | Straight league | manually | YTT-35 | 200 | |
| 135 | 0.0786 | 86.3 | 1033 | 75 | 1000 | 1800 | Straight league | manually | YTT-35 | 200 | |
| 140 | 0.08 | 90.9 | 1052 | 75 | 1000 | 1800 | Straight league | manually | YTT-35 | 200 | |
| 145 | 0.0814 | 95.3 | 1070 | 100 | 1000 | 2200 | Straight league | manually | YTT-35 | 200 | |
| 150 | 0.0828 | 100 | 1089 | 100 | 1000 | 2200 | Straight league | manually | YTT-35 | 200 | |
| 160 | 0.0856 | 110 | 1124 | 100 | 1000 | 2200 | Straight league | manually | YTT-35 | 200 | |
Product Picture:
Our Company
Our company is an experienced manufacture and engineering Company in small scale hydro power equipment . We play the role of manufacture and EPC contractor and could supply water to wire equipments and services. As turbine manufacture more than 60 years experience.
We provide customers with the complete package, from the design and manufacture of the turbine, generator and control equipment through to installation, commissioning and ongoing repair and maintenance.
1.Water Turbine Generator Unit Design & SUPPLY
2.Hydropower equipment supply
3.Feasibility study of hydropower project
4.Manufacture
5.Installation & Supervision
6.Commissioning and Training service
7. Hydro power plant rehabilitant
8.
Hydro power plant
Q1, Which turbine should I choose?
Please tell me the water head, flow rate, frequency, Total power you need
, voltage, on grid or off grid operation, we will propose a solution.
Q2, Can your factory provide all the equipment for hydropower generation?
Yes, we can provide you with turbines, hydro-generators, pressure regulators, turbine wheels, control panels, transformers, monitoring systems and more.
Q3, Can you do EPC for a hydroelectric power plant?
Yes, we can provide TURN-KEY and EPC services including measurement, design, manufacturing, construction, manufacturing, commissioning, inspection, maintenance runner replacement and refurbishment/upgrade/improvement/repair/refurbishment of turbines/generators including bearings, seals For parts and key parts, we will send technicians and workers to install equipment.
Q4, Is your company a trading company or a manufacturer?
We are a manufacturer of hydro turbine generators and started to promote the international market in 2013. Our factory is located in Sichuan, where China's water conservancy and hydropower is most developed. Welcome to visit our factory in China.
Q5, What is an acceptable MOQ?
For this product, our acceptable MOQ is 1 set.
Q6, How long is the delivery time?
Delivery times range from 15 days to 6 months depending on the model you are purchasing.
Q7, Does your company have its own independent official website?
Of course, and we can see more information about our company and products on our official website. website address: www.fstgenerator.com
Q1, Which turbine should I choose?
Please tell me the water head, flow rate, frequency, Total power you need
, voltage, on grid or off grid operation, we will propose a solution.
Q2, Can your factory provide all the equipment for hydropower generation?
Yes, we can provide you with turbines, hydro-generators, pressure regulators, turbine wheels, control panels, transformers, monitoring systems and more.
Q3, Can you do EPC for a hydroelectric power plant?
Yes, we can provide TURN-KEY and EPC services including measurement, design, manufacturing, construction, manufacturing, commissioning, inspection, maintenance runner replacement and refurbishment/upgrade/improvement/repair/refurbishment of turbines/generators including bearings, seals For parts and key parts, we will send technicians and workers to install equipment.
Q4, Is your company a trading company or a manufacturer?
We are a manufacturer of hydro turbine generators and started to promote the international market in 2013. Our factory is located in Sichuan, where China's water conservancy and hydropower is most developed. Welcome to visit our factory in China.
Q5, What is an acceptable MOQ?
For this product, our acceptable MOQ is 1 set.
Q6, How long is the delivery time?
Delivery times range from 15 days to 6 months depending on the model you are purchasing.
Q7, Does your company have its own independent official website?
Of course, and we can see more information about our company and products on our official website. website address: www.fstgenerator.com