Chengdu Forster Technology Co., Ltd.
Integrity, pragmatism, innovation, and provide the best solution for your hydro power plant.
Add to Cart
Free Energy Francis Turbine Generator Power Electric Generator Plant
The Francis turbine is the most widely used type of turbine today. This turbine can operate at a head height of 40 to 600 meters (130 to 2,000 feet). It is most commonly used in hydroelectric power generation. The output power of generators driven by this form ranges from a few kilowatts to 8 million kilowatts, while the power output range of smaller hydroelectric generators may be even lower. The design diameter of the penstock (input pipeline) of the hydraulic kinetic energy source is between 3 and 33 feet (0.91 and 10.06 meters), and the speed range is from 75 to 1000 rpm. The swing gate surrounds the periphery of the rotating flow channel of the turbine to control different power production rates by controlling the flow rate of the water through the turbine.
In most cases, Francis turbines are equipped with tall and long bearings to drive distant generators to generate electricity. Generally there are horizontal and vertical axes. The intention is to keep water away from the generator, and because the generator is separated from the turbine, This makes the installation more convenient and flexible, and also more convenient for maintenance and repair of generators or water turbines.
Francis turbine is mainly composed of components
Turbine volute: The outer shell covering the water wheel motor wheel is called "volute" because of its appearance similar to that of a snail.
Guide or stay blade: The main function of the guide or stay blade is to convert the pressure energy of the working fluid into kinetic energy. It can also guide the working fluid to flow into the rotor blades at a design angle.
Moving wheel blade: The moving wheel blade is the most important component of any type of hydraulic turbine. When the working fluid flows through the turbine, the fluid will hit the moving wheel blade and it is the center point of the tangential force impact, which makes the blade rotate and drive the shaft. Rotates, and the generator at the end generates electricity.
Draft tube: The draft tube is a pipe connected to the turbine flow channel. The end of the pipe will be connected to the discharge channel to discharge the water from the turbine into the discharge channel. The main function of the tailpipe is to reduce the flow rate of the discharged working fluid to minimize the loss of kinetic energy at the outlet of the turbine. This makes it unnecessary to reduce the height of the water head when setting the draft pipe of the turbine
Free Energy Francis Turbine Generator Power Electric Generator Plant Technical Parameter
| HL-WJ-Francis turbine generator unit | Generator | Gevernor or Regulating work | Valve | |||||
| Turbine | ||||||||
| Type | Water head(m) | Discharge (m³/s) | Speed (r/min) | Power(kw) | Efficiency(%) | |||
| HL90/ D54- WJ-60 | 67.7 | 0.77 | 750 | 440 | 86 | SFW400-8/850 | YT-3000 YT-3000 | Z941H-1.0(1.6)(2.5)Dg500 |
| 78.6 | 0.83 | 1000 | 557 | 87 | SFW500-6/850 | |||
| 91.6 | 0.9 | 710 | 87.2 | SFW630-6/990 | ||||
| 107.4 | 0.97 | 891 | 85.6 | SFW880-6/990 | ||||
| 124.7 | 1.05 | 1103 | SFW1000-6/1180 | |||||
| HL90/ D54 - WJ-71 | 98 | 1.3 | 750 | 1103 | 88.1 | SFW1000-8/1180 | YT-6000 | Z941H-1.6(2.5)Dg600 |
| 114 | 1.4 | 1000 | 1385 | 88.5 | SFW1250-6/1180 | |||
| 134 | 1.52 | 1774 | 88.8 | SFW1600-6/1430 | ||||
| 87.6 | SFW2000-6/1430 | YDT-6000 | ||||||
| 181 | 1.76 | 2709 | 86.7 | SFW2500-6/1430 | ||||
| HL90/ D54- WJ-84 | 91 | 1.75 | 750 | 1376 | 88.1 | SFW1250-8/1430 | YT-6000 | Z941H-1.6(2.5)(4.0)Dg800 |
| 107 | 1.9 | 1769 | 88.7 | SFW1600-8/1430 | ||||
| 124.5 | 2.04 | 2216 | 88.5 | SFW2000-8/1730 | YWT-10000 | |||
| 144.5 | 2.21 | 2732 | 87.2 | SFW2500-8/1730 | ||||
| 170 | 2.39 | 3527 | 88.5 | SFW3200-6/1730 | YWT-18000 | |||
| 198 | 2.58 | 4256 | 87.9 | SFW4000-6/2150 | ||||
| 229 | 2.78 | 1000 | 5500 | SFW5000-6/2150 | ||||
| HL90/ D54- LJ-100 | 86.4 | 2.23 | 600 | 3404 4211 5263 6632 8421 10526 | 90 | SF1600-10/1730 | YWT-10000 | Z941H-1.6Dg800 |
| 100.3 | 2.4 | 750 | 90 | SF2000-10/2150 | ||||
| 137.2 | 2.81 | 90 | SF3200-8/2150 | |||||
| 158.1 | 3.02 | 90 | SF4000-8/2150 | Z941H-2.5Dg800 | ||||
| 183.4 | 3.25 | 90 | SF5000-8/2150 | YWT-18000 | ||||
| 214 | 3.51 | 1000 | 91 | SF6300-6/2150 | ||||
| 250.9 | 3.8 | 91 | SF8000-6/2150 | Z941H-1.6Dg800 | ||||
| 291.1 | 4.1 | 91 | SF10000-6/2600 | |||||
| HL90/ D54- LJ-120 | 78.6 | 3.06 | 500 | 2128 | 91 | SF2000-12/2150 | YWT-18000 | Z941H-1.6Dg800 |
| 107.5 | 3.58 | 3404 | 91 | SF3200-12/2150 | ||||
| 124.8 | 3.84 | 600 | 4255 | 91 | SF4000-10/2600 | |||
| 144.8 | 4.16 | 5319 | 91 | SF5000-10/2600 | Z941H-2.5Dg800 | |||
| 169 | 4.49 | 750 | 6632 | 90 | SF6300-8/2600 | |||
| 196.8 | 4.85 | 8421 | 91 | SF8000-8/2600 | YET-30000 | |||
| 228.3 | 5.22 | 10522 | 91 | SF10000-8/2600 | Z941H-4.0Dg800 | |||
| 264.9 | 5.63 | 13158 | 90.5 | SF12500-8/2600 | ||||
If you are interested in our Free Energy Francis Turbine Generator Power Electric Generator Plant, please contact us directly
This belongs to customized products. We could design products according to your requirement. Could you give us the following parameters so that we could make a professional solution for your project.
1.flow rate ( lit/sec or m³/sec?)
2.Water head (m?)
3.Total power you need( kw?)
4.frequency (50hz or 60hz?)
5. voltage( v?)
6. on grid or off grid?
7. voltage of transmission line if it is on grid( v?)
8. Elevation(MSL)
9. Is it clean fresh water(with our sand, stone and silt ect,.)
By the way,could you tell me your whatsapp number(phone number) ?
Looking froward to hearing from you soon.
Best Regards
Nancy
Chengdu Forster Technology Co., Ltd.
Tel: +8613540368205
whatsapp:+8613540368205
wechat:+8613540368205
Fax:+86-28-87362258