Chengdu Forster Technology Co., Ltd.
Integrity, pragmatism, innovation, and provide the best solution for your hydro power plant.
Add to Cart
Mini Water Wheel Electric Hydrogenerator Water Turbine
The Pelton water turbine is an impulse type water turbine, extracting energy from the impulse of the moving water. The water is directed with high speed through nozzles against the buckets, arranged around the circumferential rim of a drive wheel – the runner. The shaft design can be either in horizontal position in combination with one or two nozzles per runner, or in vertical position with up to six nozzles per runner.
Forster has invented various manufacturing methods for Pelton runners - tailor-made to meet the customers’ needs.
Fully forged: The buckets are manufactured out of the runner disk.
HIWELDTM: Cast or forged bucket parts are welded onto the disk.
Working Principle
When water flows from the pressure foray into the turbine nozzle through pipe, its potential energy is converted to kinetic energy by the nozzle. The high speed water jet comes out from the nozzle strikes at the buckets (blades) at a certain angle (not in a tangential direction) against the rotating surface of the runner. The water flows into the propeller (turbine runner) from one side and flows out from other side.
In a Turgo, the runner is less expensive to make than a Pelton Wheel and does not need an airtight housing like the Francis. It also has a higher specific speed, handling a greater flow than the Pelton Wheel. This leads to a reduced generator and installation cost. Turgos operate in a head range where the Francis and Pelton overlap.
| XJ1 3-W-20/1 * 5 turbine performance data and supporting table | ||||||||
| Model | Turbine Parameters | Generator Parameters | Driving mode | |||||
| Design head(m) | Under the design head | Design speed (r/min) | The power of generator | The runaway speed | Rated speed(r/min) | |||
| Flow rate (m3/s) | The output(kw) | |||||||
| XJ1 3-W-20/1 * 5 | 30 | 0.0482 | 10.9 | 1095 | 10 | 1000 | 1800 | Indirect connection |
| 35 | 0.0521 | 13.4 | 1183 | 10 | 1000 | 1800 | # | |
| 40 | 0.0556 | 16.2 | 1265 | 15 | 1500 | 2200 | # | |
| 45 | 0.059 | 19.7 | 1340 | 15 | 1500 | 2200 | # | |
| 50 | 0.0621 | 23.4 | 1410 | 26 | 1500 | 2200 | Direct connection | |
| 55 | 0.0652 | 27.4 | 1480 | 26 | 1500 | 2200 | # | |
| 60 | 0.068 | 31.2 | 1550 | 26 | 1500 | 2200 | # | |
| 65 | 0.071 | 35.1 | 1610 | 40 | 1500 | 2400 | # | |
| 70 | 0.0735 | 38.8 | 1670 | 40 | 1500 | 2400 | # | |
| 75 | 0.076 | 42.5 | 1730 | 40 | 1500 | 2400 | Indirect connection | |
| 80 | 0.0786 | 48.2 | 1790 | 40 | 1500 | 2400 | ||
| 85 | 0.081 | 49.3 | 1840 | 55 | 1500 | 2400 | # | |
Mini Turgo Turbine Product pictuers:
Chengdu Forster Technology is focused on design and manufacturing hydro turbines. The company was founded in 1956. Forster is the first Chinese state-owned enterprise and spares no effort to expand international market in 2013,At present, we have obtained orders in many water-rich areas such as Europe, Asia, South America, North America, etc., and as partners, we are qualified as long-term suppliers in many regions.
Forster always provides technical advice, services and the best technical solutions to customers based on their parameters. At the same time, it keeps offering after sale service for our product.
We always adhere to the principle of honesty and pragmatism, quality first, will be broad-minded, the attitude of life into our work, and strive to create a win-win situation for customers, enterprises and society. In the fierce market competition, we have always adhered to the details of success or failure, focusing on the achievement of excellence in the spirit of enterprise. In the friendly cooperation with customers at home and abroad, we have been pursuing the business philosophy of creating maximum value for customers.
Q1, Which turbine should I choose?
Please tell me the water head, flow rate, frequency, Total power you need
, voltage, on grid or off grid operation, we will propose a solution.
Q2, Can your factory provide all the equipment for hydropower generation?
Yes, we can provide you with turbines, hydro-generators, pressure regulators, turbine wheels, control panels, transformers, monitoring systems and more.
Q3, Can you do EPC for a hydroelectric power plant?
Yes, we can provide TURN-KEY and EPC services including measurement, design, manufacturing, construction, manufacturing, commissioning, inspection, maintenance runner replacement and refurbishment/upgrade/improvement/repair/refurbishment of turbines/generators including bearings, seals For parts and key parts, we will send technicians and workers to install equipment.
Q4,Is your company a trading company or a manufacturer?
We are a manufacturer of hydro turbine generators and started to promote the international market in 2013. Our factory is located in Sichuan, where China's water conservancy and hydropower is most developed. Welcome to visit our factory in China.
Q5, What is an acceptable MOQ?
For this product, our acceptable MOQ is 1 set.
Q6,How long is the delivery time?
Delivery times range from 15 days to 6 months depending on the model you are purchasing.
Q7,Does your company have its own independent official website?
Of course, and we can see more information about our company and products on our official website.
website address: www.fstgenerator.com